Jiangsu cleanup before Ash Ash Jiangsu cleanup project safety measures 1, workers must wear a helmet, dust mask, gloves, overalls must be intact, non-wear hard bottom, no-slip work shoes, two, work, first site clean, if a large plot material temporarily unable cleared, you must clean out the safe passage of people and workers out of the workplace. 3, ready for flashlights and other lighting appliances. 4, the operating personnel must be familiar with workplace environmental conditions and routes before work. 5, and each job before the job first floor the following floor staff contact is good, to prevent the collapse of the material to be wound. 6, the chute cover and cover withdrawal agreement To force to prevent bruising and other injuries smashed injuries. 7, - blocking the process, Universal's library at the end inspection personnel must keep clear of the block next to the bank number of Roots blower control cabinet, so that timely stop blower, cement powder industry to prevent suffocation or buried. 8, - blocking the process, to cause a person to do any work to close the pneumatic ram. 9, in the field of personnel is not clean-up operations, it must stand in the safe passage for timely evacuation. 10, in case of emergency paste while workers did not evacuate in time, should remain calm, to protect the eyes, should be explored down the railing with both hands, slowly down, anxious to prevent falls under. 11, for oxygen cutting and welding work is performed in accordance with the appropriate procedures. 12, in case of this measure in unprecedented terms, site person in charge can be developed according to the actual situation at the scene. 13, this measure must be convened before the job participants to learn and make it clear that preventive measures. Independent security awareness and increase safety awareness group. 14, job site safety guardians set up on-site safety monitoring, supervision and process safety, to prevent accidents. Electricity, gas welding technology for security measures 1, before welding work, you should first check the safety and reliability of equipment and tools. 2, when the welding operation, the construction site should be cleared of flammable materials around or cover, isolation, when rain stopped open-air welding operations. 3, in a metal container, when welding on metal structures, welders must ensure that the insulation between the body and the weldment, must wear leather gloves, wear insulated shoes and other special protective measures. 4, gas cutting workplace must remove flammable materials, acetylene gas and oxygen storage must be located no less than 5m, the use of both of not less than 10m. 5, is strictly prohibited burning Hange with randomly placed. 6, after the end of the work or before work to cut off power and air supply, check the operation site, confirmed safe before leaving. 7, knock carefully before sweeping health, so that work finished, material quiet, clean space. Jiangsu three Alegre, high-altitude anti-corrosion Co. 1___ Jiangsu Jiangsu cleanup Ash Ash Cleanup Project