Technical characteristics of chimney corrosion Companies chimney chimney corrosion unit green energy presents a new chimney technology, namely the use of aerodynamic characteristics of vortex flows, properly solve the corrosion problem after wet desulfurization chimney wall. At the same time, the new chimney also has better energy, environmental effects. Systematically discusses the basic content of the new chimney technology, the main technology, design features and operating principles, from aerodynamics and engineering practical aspects justify the chimney and practical feasibility of new technology! In the construction of chimney corrosion, we should pay attention to are the following conditions: 1, the construction site should be clean and tidy with ventilation, the content of harmful gases must not exceed the specified requirements. In addition to the use of the chimney corrosion in unexpected flammable and non-paint stored in the construction site. That attention to some environmental security, clean up the site. 2, the venue is non-smoking is not allowed within 10 meters of welding or hot work, the construction should be explosion-proof lighting. Construction of the operator should be equipped with the necessary protective equipment, construction in the container, it should turn the job, and take good ventilation. Have anti-slip, workers should wear seatbelts. 3, the use of high-pressure airless spray gun, the gun should be grounded to prevent static sparks causing fire and explosion. If using airless spray equipment at very high pressure job, not the gun nozzle holes with palm facing the body, in order to avoid causing personal injury. 4, chimney corrosion construction is completed, in the cleaning tools and waste solvent containers shall not be dumped, should be properly addressed. A place of unexpected things, where to put the provisions of the elements on corrosion medium corrosion coating chimney, humidity, friction coefficient and other harsh corrosive environment, I have a number of professional and technical staff, which summarize the evaluation, After the appearance of roughness of the chimney, the runtime air temperature, flue gas humidity and PH value, matching the particular chimney anti-corrosion materials to make a scientific and accurate identification, to ensure that the chimney desulfurization corrosion acid leak at runtime water appearance, and praised by many owners of units in the conventional construction in Jiangsu Ligang three high-altitude anti-corrosion Co. 1___ chimney corrosion Companies chimney corrosion unit